Flash News
Welcome to IARC

Publisher Login

Latest News
Welcome to IARC- JCR Report

Submit your Journal to get IARC-JCRR Indexing and Impact Factor
 

Impact Factor calculated by IARC on the basis of Journal Citation Reference (JCR) Report.

 

Contact: iarcdpi@gmail.com

 

A REVIEW ON OPTIMIZATION OF MACHINING PARAMETERS OF DIE TOOL STEEL FOR HARD TURNING USING COATED AND UNCOATED CARBIDE TOOL
Sumedha Sharma, Jagdip Chauhan

Published in: International Journal of Current Engineering And Scientific Research ( IJCESR)
Volume- 4, Issue-10, pp.31-36, Oct 2017
DPI :-> 16.10046.IJCESR.2017.V4I10.3136.2063



Abstract
Hard turning is considered as a new machining process aimed at turning hardened steel with good surface quality. This study is carried out to evaluate surface roughness and tool wear while hard turning of hardened AISI H13 HRC using coated and uncoated carbide tool. The machining experiments for surface roughness and tool wear were conducted based on the Taguchi method. A series of cutting test will have done under various combination of speed, feed and depth of cut on the two performance outputs of surface roughness and tool wear. The surface roughness of the work piece is measured with the help of surface roughness tester and tool wear is measured with the help of optical microscope

Key-Words / Index Term
HardTurning, Surface roughness, Tool wear, Taguchi method

How to cite this article
Sumedha Sharma, Jagdip Chauhan , “A REVIEW ON OPTIMIZATION OF MACHINING PARAMETERS OF DIE TOOL STEEL FOR HARD TURNING USING COATED AND UNCOATED CARBIDE TOOL”, International Journal of Current Engineering And Scientific Research ( IJCESR), 4, Issue-10, pp.31-36, Oct 2017. DPI:16.10046.IJCESR.V4.I10.2063